CVD Equipment Corporation > Conceptronic     cvd equipment youtube OUR DIVISIONS/PRODUCTS:

Conceptronic, a division of CVD Equipment

enabling tomorrow's technologies™


Square Type Nests

Series 1001004 - Square Type Nests
Price class "As Quoted"
Square Nests are used to align full area-array components with the appropriate Freedom nozzle.  This nest allows the component to be held by its edges, so that solder paste can be applied directly to the component. Consult the Conceptronic, Inc. Parts / Service Department for quotations on new or custom sizes.  A component drawing and sample must be submitted for engineering evaluation before a quotation can be issued.  Optional adjustment clamps, Conceptronic, Inc. part number 50201018, may be used for precise justification of the component into one corner of the nest.  Each clamp requires two #2-56 x ¼" flat head screws, Conceptronic, Inc. part number 1146M, to hold it onto the nest.  Order two clamps and four screws per nest if desired.  Parts that have "G" and "H" dimensions listed as "NONE" do not have #2-56 tapped holes and therefore, can not use the optional clamps.

Square Type Nests  - Series 1001004


P/N OLD P/N
"A"
"B"
"C"
"D"
"E"
"F"
1001004-01 97200701
1.097
1.097
0.917
0.917
0.030
0.155
1001004-02 97200702
0.585
0.900
0.393
0.893
0.030
0.155
1001004-03 97200703
1.416
1.416
1.293
1.293
0.030
0.155
1001004-04 97200704
1.412
1.412
1.206
1.206
0.030
0.155
1001004-05 97200705
1.413
1.413
1.338
1.338
0.030
0.155
1001004-06 1000067
1.613
1.613
1.486
1.486
0.030
0.155
1001004-07 N/A
1.093
1.093
1.035
1.035
0.030
0.155

Series 1001005 - Post Type Nests
Price class "As Quoted"
Post Nests are used to align perimeter-array, or leaded components with the appropriate Freedom nozzle.  This nest allows the component to be held by its center, so that solder paste can be applied directly to the component. Consult the Conceptronic, Inc. Parts / Service Department for quotations on new or custom sizes.  A component drawing and sample must be submitted for engineering evaluation before a quotation can be issued.  Optional adjustment clamps, Conceptronic, Inc. part number 50201018, may be used for precise justification of the component into one corner of the nest.  Each clamp requires two #2-56 x ¼" flat head screws, Conceptronic, Inc. part number 1146M, to hold it onto the nest.  Order two clamps and four screws per nest if desired.  Parts that have "G" and "H" dimensions listed as "NONE" do not have #2-56 tapped holes and therefore, can not use the optional clamps.

Post Type Nests - Series 1001005

P/N OLD P/N
"A"
"B"
"C"
"D"
"E"
"F"
"G"
"H"
1001005-01 97200726
1.094
1.094
0.325
0.325
0.030
0.155
0.125
0.125
1001005-02 97200727
1.215
1.215
0.360
0.360
0.030
0.155
0.125
0.125
1001005-03 97200728
1.649
1.649
0.703
0.585
0.030
0.155
0.125
0.125
1001005-04 97200729
1.727
1.727
0.720
0.720
0.030
0.155
0.125
0.125
1001005-05 97200730
0.688
0.688
0.418
0.418
0.030
0.045
0.125
0.125
1001005-06 N/A
1.703
1.703
1.555
1.555
0.030
0.051
0.125
0.125
1001005-07 N/A
0.609
0.569
0.358
0.319
0.030
0.155
0.125
0.125
1001005-08 N/A
0.825
0.825
0.524
0.524
0.030
0.155
0.125
0.125
1001005-09 N/A
1.411
1.411
0.790
0.790
0.030
0.155
0.125
0.125
1001005-10 N/A
1.412
1.412
0.782
0.782
0.030
0.155
0.125
0.125
1001005-11 N/A
1.613
1.613
0.866
0.866
0.030
0.155
0.125
0.125
1001005-12 N/A
1.810
1.810
1.061
1.061
0.030
0.155
NONE
NONE
1001005-13 N/A
1.101
1.101
0.569
0.569
0.030
0.155
0.125
0.125
1001005-14 N/A
0.939
0.939
0.429
0.429
0.030
0.155
0.125
0.125
1001005-15 N/A
0.975
0.739
0.750
0.514
0.030
0.155
0.125
0.125
1001005-16 N/A
1.133
1.133
0.917
0.917
0.030
0.155
0.125
0.125

Series 1001567 - Pocket Type Nests
Price class "As Quoted"
Pocket Nests are used to align full area-array components with the appropriate Freedom nozzle.  This nest allows for components that do not have any edge, or center area, to support the component. Consult the Conceptronic, Inc. Parts / Service Department for quotations on new or custom sizes.  A component drawing and sample must be submitted for engineering evaluation before a quotation can be issued.  Optional adjustment clamps, Conceptronic, Inc. part number 50201018, may be used for precise justification of the component into one corner of the nest.  Each clamp requires two #2-56 x ¼" flat head screws, Conceptronic, Inc. part number 1146M, to hold it onto the nest.  Order two clamps and four screws per nest if desired.  Parts that have "G" and "H" dimensions listed as "NONE" do not have #2-56 tapped holes and therefore, can not use the optional clamps.

Pocket Type Nests - Series 1001567

P/N
"A"
"B"
"C"
"D"
10001567-01
1.014
1.014
0.060
0.030

© 2014 Conceptronic, a division of CVD Equipment Corporation
355 South Technology Drive | Central Islip, NY 11722 | Tel 631.981.7081 | Fax 631.981.7095
All rights reserved. No part of this website may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of CVD Equipment Corporation.
Home | Company | Products | News | RFQ | Contact | Privacy | www.conceptronic.com