 |
enabling tomorrow's technologies™ |
|
|
About Conceptronic Founded in 1987, Conceptronic is the pre-eminent worldwide supplier of thermal processing systems used in the electronic component and SMT (surface mount technology) circuit assembly industries. We are a key supplier to such multi-national giants as Ford/Visteon, Chrysler, Hitachi, Motorola, Olivetti, GVC and ASE. In 2002, Conceptronic became a division of CVD Equipment Corporation, a leader in its own field of high temperature and pressure furnaces for the Semiconductor market. With our Corporate Headquarters in Ronkonkoma, New York and multiple manufacturing facilities and offices worldwide, we are committed to the Electronic Manufacturing market and continuous improvement of our products. |
|
ChipFlo 6 HT
Ovens provide the smallest possible footprint for high-volume backend semiconductor assembly... HVAHT (High Velocity Air) Series 70 (High Velocity Air) Series
Forced convection ovens are designed for SMT mass reflow soldering, Sn-PB as well as PB-Free alloys... HVAHT (High Velocity Air) Series 102 (High Velocity Air) Series
Ovens improved the great thermal performance that made Conceptronic original HVC ovens preferred by engineers for Automotive... HVAHT (High Velocity Air) Series 120 (High Velocity Air) Series
Uniformity and repeatable computerized control guarantees good solder joints today and many years to come... HVAHT (High Velocity Air) Series155 (High Velocity Air) Series
Re-packaged wall-mount version of the widely successful full-size 1500... HVNHT70 (High Velocity Nitrogen) Series
Supports simple dry-contact communication for hazard alarms... HVNHT102 (High Velocity Nitrogen) Series
For non-hazardous purge and process gas delivery applications... HVNHT120 (High Velocity Nitrogen) Series
Forced convection ovens are designed for SMT mass reflow soldering, Sn-Pb as well as Pb-Free alloys... HVNHT155 (High Velocity Nitrogen) Series
Original HVC ovens preferred by engineers for Automotive, Telecommunications, Medical, Military, and Semiconductor industries.... Freedom 3000 Plus Rework Station
Printed circuit board repair station designed for component rework, low volume prototype reflow soldering and process development... Standard Large Open Nozzles - Series 1000413
Large Open Nozzles are the most common, all purpose nozzles, and are recommended for most rework applications... 2" - 2.5" Tall Large Open Nozzles - Series 1000423
Intended for use on Freedom 3000 or Freedom 2000 with the Z-Axis 1" Extension Retrofit option installed... Large Open Nozzles - Series 1005282
Most common, all purpose nozzles, and are recommended for most rework applications... Perimeter BGA Nozzles - Series 1000418
Perimeter BGA nozzles are used when the BGA component balls are only on the perimeter, and not across the entire package... Recessed Large Open Nozzles - Series 1000417
Recessed Large Open nozzles are a special purpose nozzle with a large, bellowed vacuum cup for superior grip... Small Open Nozzles - Series 1000412
Small Open nozzles are used for any small components, leaded or bumped. Part numbers for vacuum cups... Large Quad Nozzles - Series 1000411
Large Quad nozzles are used when it is desired to direct hot gas primarily around the perimeter of the component body... Small Quad Nozzles - Series 1000410
Small Quad nozzles are used for any small components, leaded or bumped. Part numbers for vacuum cups... Large Dual Nozzles - Series 1000415
Large Dual nozzles are used when it is desired to direct hot gas primarily along two edges of a component... Small Dual Nozzles - Series 972004xx & 100005x
Small Dual nozzles are used for any small components, leaded or bumped. Part numbers for vacuum cups... Extended Tip Nozzles - Type 1 - Series 1000416
Extended Tip nozzles are used for surface mount PLCC sockets and other special applications... Extended Tip Nozzles - Type 2 - Series 1000419
This type of extended tip nozzle is intended for use on larger sockets, and can use an optional vacuum cup... Extended Tip Nozzles - Type 3 - Series 1000420
Extended tip nozzle is intended for use on smaller, lighter components. A special vacuum tip is machined into the nozzle... Extended Tip Nozzles Micro BGA - Series 1000421
Used for surface mount PLCC sockets and other special applications, intended for use on smaller, lighter components... Nozzle Shields - Series 1000424
Shields may be used for some applications where rework will be performed near other, heat-sensitive devices... Square Type Nests - Series 1001004
Square Nests are used to align full area-array components with the appropriate Freedom 3000 nozzle... Hooded Nozzle Attachments - Series 1000425
Hooded nozzle attachments are used for surface mount connectors. Hooded nozzle attachments fit onto... Bottom Nozzles - Series 1001130
Can be used with the hooded connector nozzles. The board support pins and rods must be removed from the bottom heater cup... Tube Nozzles - Series 1003158
Tube nozzles are used for blowing air into a tube or other such part. It is designed to go down, inside the component.... Special Application Nozzles - Series 97201001
Special Application nozzles are custom, special purpose nozzles. The Conceptronic, Inc. Parts / Service... Conceptronic, division of CVD Equipment Corporation |
1860 Smithtown Avenue | Ronkonkoma, NY 11779 | Tel 631.981.7081 | Fax 631.981.7095
Home | Company | Products | News | RFQ | Contact | Privacy | www.conceptronic.com
